Thin plastered thermal insulation system is the longest and most widely used external wall thermal insulation system at present, while the external wall thermal insulation decoration integrated board is the external wall energy-saving decoration product originally developed by Chinese enterprises and formed a complete application system. What are the advantages of the integrated exterior insulation board compared with the traditional thin plastering insulation system?

1, the traditional thin plastering insulation system between each layer is completely maintained by the adhesive force, after long-term thermal expansion and contraction and stress, between layers are easy to separate, insulation layer wall is easy to fall off, whether for public buildings or family homes, will cause great security risks.

And uetersen thermal insulation decoration integrated board is composed of thermal insulation materials and decorative materials composite, set thermal insulation, decoration, energy saving, fire prevention in one of a new building materials. Insulation placed on the wall surface of buildings and insulation of decorative systems. Excellent and long-term effect, less thermal bridge, energy saving and heat preservation effect is good.

2, due to the deformation of the wall structure or improper selection of raw materials and ingredients and other factors, it is easy to crack the thermal insulation mortar of the building wall and crack the wall surface, commonly known as "bandage floor", "turtle crack", resulting in water seepage of the wall, not only spread outside the external wall, but also permeate into the indoor, directly affecting the lives of residents.

The biggest advantage of thermal insulation decoration integrated board lies in the standardization and standardization of all the traditional processes that must be produced by discrete technology in the field. With stable product quality, not affected by the site construction environment and other advantages.

3, the construction is greatly affected by climate conditions, the traditional insulation layer construction needs to be divided into multiple processes, wind, rain and snow and other bad weather easy to lead to the insulation layer blowing, falling off, rock wool and other insulation materials wet after the basic scrap, affecting the construction, prolong the working cycle, increase the loss and cost.

Uetersen product function integration, one construction can solve the two functional requirements of insulation and decoration. Product installation is almost not affected by climate conditions, in addition to the very bad crack climate, usually can be constructed. The whole construction period can be shortened by about half.

conclusion

Traditional thin-plastered insulation systems are typically used for less than 10 years, and once that time passes, the building will have all kinds of problems, even if the outer layer may have completely fallen off. In other words, if a building has a thin plastering system, that means that the building will have to undergo four or five facelifts in its lifetime.

Different from the thin plastering system, the integrated board for exterior wall insulation decoration has a relatively long life, which can reduce the number of repair and reconstruction and greatly reduce the cost. In addition, thermal insulation decorative integrated board can not only effectively prolong the life of the building, but also more environmentally friendly, in line with the concept of energy conservation and environmental protection.